BLUETTI AC70PLiFePO₄ · 3,000 cycles
BLUETTI · Specs checked against the manufacturer · 2026-09-29

BLUETTI AC70P

How long does it last? Battery-only estimates from the same 15-minute simulation as our planner (full battery, 10% reserve, no solar):

  • Wi-Fi router39.3 h
  • Television7.6 h
Capacity864 Wh
AC output1,000 W
Startup surge—
Weight10.2 kg
Solar input500 W
AC recharge90 min
599 €

Recorded price · 2026-09-29

Test it with your own devices ↓
BATTERY-ONLY EXAMPLES

How long can the BLUETTI AC70P run everyday devices?

Each row uses one device continuously, a full battery, 10% reserve, 85% AC efficiency and 8 W of inverter consumption. No solar or expansion battery is included.

Device and assumed loadEstimated runtimeConsumption scenarios
Wi-Fi router10 W average39.3 h34.2 h – 44.7 h
Laptop45 W averageStartup needs verification—
Television80 W average7.6 h6.2 h – 9.3 h
Refrigerator30 W average · 120 W when running · 900 W startup assumptionStartup needs verification—
Freezer45 W average · 150 W when running · 1000 W startup assumptionStartup needs verification—

These are editable planning examples, not measured product tests. The range uses 25% higher and 20% lower device consumption; it is not a guarantee. The refrigerator assumes a 25% duty cycle and the freezer 30%. Check your actual wattage and motor startup. The model stops at 168 hours.

Calculation method and limitations
SOURCE-BASED

Specifications: BLUETTI AC70P

Nominal capacity
864 Wh
Continuous AC output
1,000 W
Documented startup surge
Not verified — manual check
Weight
10.2 kg
Solar input
500 W
Solar voltage window
12–58 V
Solar connector / adapter
DC7909
Modelled solar current limit
10 A
Claimed battery cycles
3,000
Rated AC charge time
90 min
Claimed UPS / EPS switching
20 ms
Modelled expansion battery
Not modelled
Battery chemistry
LiFePO₄
Regional output versions
EU 230 V / 50 Hz · US 120 V / 60 Hz

Regional mains voltage requires the corresponding regional product. Solar voltage/current limits can apply per port; check the exact manual. Modelled DC/USB budgets are conservative planning bounds, not a full protocol compatibility test.

YOUR OWN SCENARIO

Test the BLUETTI AC70P with your devices

Pick what you need to keep running, set the hours and add solar if you have it. The station stays selected; switch it any time to compare.

Configuration mode

The essentials for a quick backup plan.

Your backup setup

01 / THE ESSENTIALS

Select your devices

Tap to add or remove

Starting values are editable. Adjust watts, daily hours and quantities in your list.

Devices to keep powered3

DEVICEWATTSH / DAY
Daily energy 1,230 WhStartup peak 955 W

Let the sun do some work

Your plan runs on stored battery energy only.

Your power station

Your power outlook

24 H SCENARIO
8.4hours until first interruption
SCENARIO ESTIMATEDraw −20% / +25%

Scenario range: 6.3–11.5 h, with −20% / +25% device draw. 168+ means no interruption within the seven-day simulation.

Electrical compatibility needs attention
0%25%50%75%100%0 h6 h12 h18 h24 h
Battery levelSolar hoursReserve 10%
Total capacity864 Wh
Solar accepted0 Wh
Battery at 24 h10 %

One system. Three scenarios.

BLUETTI AC70P · 24 h target · 400 W solar configuration

No solar

8.4 hUntil first interruption
Conservative
6.3 h
Battery at target
10%

Check connections

Typical sun

43.4 hUntil first interruption
Conservative
21.2 h
Battery at target
23%

Check connections

Cloudy · 50%

19.9 hUntil first interruption
Conservative
15.2 h
Battery at target
10%

Check connections

Solar columns are comparison scenarios. Turn on solar charging to include generation in your main plan.

Same devices, battery, starting charge and schedule. Cloudy uses 50% of the local monthly solar profile. Historical or estimated local profile; not a forecast. 168+ is the simulation limit.

Check before connecting

True motor startup surge is not verified for this model. Power-lifting modes are not treated as motor surge.

Make your power go further

Only critical or important devices are selected. Add solar or a larger battery to extend this plan.

Suggestions preserve critical loads and do not change medical device settings.

COMPARE THE POSSIBILITIES

Different ways to keep going

1 setups fit your scenario and known budget

Categories use the conservative runtime estimate and known item subtotals. Known cable and accessory costs are included; unpriced items remain pending. If an option wins more than one category, its labels are combined.

Keep your plan within reach

Save your scenario, share a link or print your backup checklist.

Transparent by designEvery estimate has a source or an explicit assumption.
Explore our methodologyBrowse all 22 stations