AC vs DC: where your battery energy goes
A matched direct-current connection can avoid an inverter step, but the right adapter still matters.
Each conversion uses energy
AC supply usually involves an inverter plus the device’s power supply. DC or USB may avoid the AC step but still involve conversion and cable losses. The planner models AC efficiency separately from a 92% DC/USB assumption.
Check the full connection
Voltage, polarity, current, connector and USB Power Delivery profile must all match. A high printed USB wattage alone does not show whether a device’s required voltage profile is supported.
Medical devices need approved accessories
Use only the device manufacturer’s approved power path and backup plan. A generic matching connector is not enough. Do not change prescribed treatment settings to improve a runtime estimate.
A small load makes inverter overhead visible
For a hypothetical 10 W router running continuously, compare the planner’s editable 85% AC efficiency and 8 W inverter overhead with its 92% DC assumption. Neither is a measurement of a particular station.
| Power path | Battery-side draw | Energy over 24 h |
|---|---|---|
| AC inverter | 10 / 0.85 + 8 ≈ 19.76 W | ≈ 474 Wh |
| Compatible direct DC | 10 / 0.92 ≈ 10.87 W | ≈ 261 Wh |
Under these assumptions, avoiding the AC path saves about 213 Wh per day. Real adapters and stations can behave differently, and some ports shut off at very low loads. Check the required voltage, current, connector and polarity; then test the actual setup.
Before choosing your setup
- Use a supported output voltage and the correct polarity.
- Check USB Power Delivery profiles and the cable rating when using USB-C.
- Test low-load auto shutoff and the approved adapter, especially for critical equipment.
Common questions
Is DC always more efficient?
No universal percentage applies. It can avoid an inverter step, but adapter losses, voltage conversion, cable resistance and port behaviour still matter. Measure the specific path if runtime is critical.
Can I connect a medical device through any matching plug?
No. Use the manufacturer-approved power accessories and backup arrangements. Connector shape alone does not establish electrical compatibility.
This guide explains electrical planning for portable plug-in devices. Verify your exact manufacturer manuals and operating conditions.